Questions and answers

On a dell inspiron 3542 laptop, the signal drops to minimum (does not turn off) and nothing boots. It is important to note that other devices (a couple of phones) at the same time work stably and do not hang. I already tried to update the drivers for wifi (Dell Wireless 1705 802.11b / g / n (2.4GHZ)),

A router remained from Rostelecom provider. The new provider connected the Internet through this router, but the next day found that the WiFi network was open. (It used to be protected). It was not possible to put protection in the router, the settings windows close, not allowing to change something. Thought that someone

Hello. I have a very strange problem that I am facing for the first time. On March 18, in the evening, I noticed the problems of an unstable Internet. How did the problem appear? I sat in a discord with friends, and at first did not pay attention - I thought, well, it happens. Communicated talked, abruptly the connection becomes very bad,

Good afternoon! I really need help! Essence of the question. In December, an Asus VivoBook A512FL laptop was purchased, it runs on Windows 10. At home, it was connected from a Wi-Fi network, a router - Zyxel Keenetic (bought in 2012), an operator - Rostelecom, speed - up to 100 Mbps. Two phones are additionally connected to the network,

Good afternoon! The situation is rather sad. It is necessary to organize a WiFi network in a small apartment, where the router is planned to be placed in a wardrobe with mirrored doors. I read a fairly large number of articles and forums on this topic and realized that this network would be extremely inefficient. But,

Good afternoon. Router model: D-Link 615 E4 Adapter model: TP-Link Archer T6E v1.0 OS: Windows 7 x64 I can't get the adapter to work in the 802.11n standard. The speed is constantly jumping, up to the dropout in 802.11b. At the same time, the phone lying in 20 cm works great (in the figure you can see

Hello, in general, the problem was such a laptop was in the village and the Internet was working with a wire from the router to the laptop. I took the laptop to the city and saw the networks perfectly and caught it with 5-4 sticks, but a week later he stopped seeing many networks and catches my wifi for 1 stick and sometimes even disappears altogether. There were some

Good afternoon. Problem. There was an old DIR-300 router. In the neighboring rooms, wi fi did not accept the Internet well on a computer or tablet. I decided to buy a modern router with good characteristics. Took TP-Link Archer C6. We connected, configured, the Internet appeared. The cable speed is excellent, about 100 MB.

Yesterday I got a router - TP-LINK TL-WR940N, for the first time I ran into it face to face, and with routers in general. The point is this: the router has 3 modes, & 34; Access Point & 34; , & 34; Standard Wi-Fi Router & 34 ;, and & 34; Signal Booster & 34 ;. When the standard wifi mode is selected, the router can

Good afternoon. The situation is as follows: there is an Asus RT-AC51U router in the apartment. Half of the apartment is in the coverage area, and the other part is completely without Wi Fi. In the far room from the router there is a network cable that I want to connect to the add. equipment so that it distributes Wi-Fi to the rest of the apartment. Started a question

I bought an LG 43UK6200 TV. There is a TV set-top box from MTS. Can't figure out how to set up channels. The TV and set-top box are connected to each other via HDMI, the antenna is connected to the set-top box. If you turn it on via HDMI, then all channels are shown, but you can switch only with the remote control from the set-top box.

Hello, I bought a new computer, that is, I assembled everything myself, the computer is not cheap, after installing Windows on a clean hard one, I installed the drivers for the network card and chipset, when I connect the phone (Samsung S8 +), it recognizes everything, etc. press to turn on the USB modem on the phone, on the indicator

Kind time of day, there is a problem with the Miracast wireless display (WiDi) in Windows 10 when displaying on the TV screen. In the parameters, the device is found, when the transmission is activated on the TV screen, a connection is made, that is, the connection window on the TV pops up (only the computer screen function is selected)

The other day I bought a dual-band Wi-Fi router, it started to connect, etc. It has two networks, one 2.4 GHz, the other 5 GHz. My computer and mobile devices cannot see a 5 GHz router, they only see 2.4 GHz. As if in the search for Wi-Fi Devices and PCs see only Tp_Link_0D34 (2.4 GHz), and Tp_Link_0D34_5G

How to connect LG SJ3 soundbar to Samsung UE50MU6100 TV via bluetooth adapter? Is it possible? Will it make sense? We presented a soundbar, connected it via an optical cable, the sound volume is not enough. When pairing via bluetooth from the phone, the sound is excellent, from the computer via HDMI the volume is also good,

Hello. I have a TP-Link TL-WN723N USB adapter that I want to use on my laptop - Dell Latitude E7250, my OS is Windows 8.1 Enterprise. I installed the latest drivers for the USB adapter and TP-Link utility for these purposes, followed your instructions to create an access point

Good afternoon! The problem is this. I have TP-Link TL-WR845N, Rostelecom provider, tariff All at once 2019. I take speed measurements with Speedtest mobile application and PC in Wi-Fi environment. With a normal signal, PC speed is 20MB, mobile speed is 35-40MB. I check the signal itself with the WI-Fi Monitor application.: Somewhere

Good afternoon. Tell me how to connect the Canon PIXMA G3411 MFP via WIFi to the ASUS RTN 12 router in all the instructions that I found you need to hold down the WPS button, but it is not on the router. What should I do? Thank you very much for your help. Answer Good afternoon. ASUS RT-N12 router has a lot of modifications (+, VP, C1,

Good evening. This is my problem. There is a video surveillance system that must be connected to the Internet for remote viewing. The system itself with a router that looks towards the Internet cannot be connected with a wire (features of the room, repairs, etc.) A router that is connected

Good day. There are two routers (the first D-Link DIR-615, the second TP-Link TL-WR840N), connected by a wire, the main Internet cable is included in D-Link, at first glance everything turned out to be simple, connected from LAN D-Link to WAN TP- Link and everything works, without any settings, and Wi-Fi, and through the wire.