I have already written instructions for entering the settings for almost all popular routers. I even prepared a universal instruction for entering the control panel, but somehow forgot about TP-Link. Therefore, I decided to prepare an article on entering the settings on TP-Link routers. Nice and popular devices. I myself have been using this company's router for many years.
It is very easy to get into the TP-Link control panel. Definitely not more difficult than on other devices. This article will apply to all TP-Link router models (TL-WR841N, TL-WR741N, TL-WR940N, etc.). Since everything is almost the same there, for which I love TP-Link.
If you bought yourself a router and decided to configure it yourself, then you cannot do without entering the settings, this is understandable 🙂 Configuring these routers is not at all difficult, you can configure everything without any problems according to the instructions from our website (if you don’t find it, write in the comments) ... Well, even if the wizard will configure everything for you, in the process of using the router, you will most likely have to change some settings. For example: change the password for Wi-Fi, remember the forgotten password in the settings of your TP-Link, or update the firmware. And every time to call the master, it is not convenient, and even expensive. You can do everything yourself in a couple of minutes, and if something doesn't work out, we will help!
Entering TP-Link settings: 192.168.1.1, or 192.168.0.1
We do this:
- We connect to a Wi-Fi router. You can connect either via a Wi-Fi network or via a network cable. You can enter TP-Link settings even from a tablet or smartphone through the TP-Link Tether application (but you can also use the browser of your mobile device). But I advise using a computer (laptop).
- Open any browser and go to 192.168.1.1, or 192.168.0.1. It all depends on the router model. The address for entering the settings is indicated at the bottom of the router.
- You will be prompted for a username and password. The default is admin and admin. If you have already changed them, then indicate yours.
- That's it, you went to the TP-Link router settings.
Now let's look at everything in more detail and with pictures.
We connect to the router via Wi-Fi, or cable. Read more about how to connect to Wi-Fi here. If you have a new router, fresh from the store, then the wireless network will have a standard name. Something like "TP-LINK_0919".
Or take the network cable that comes with your router and connect it to your computer or laptop into a network card. And on the router into the yellow LAN connector. Like this:
Connected, now launch any browser on your computer. We need to find out which IP address you can use to enter the settings of our router. Usually, in TP-Link this is the address192.168.1.1, or192.168.0.1... Now it is usually not the IP address that is indicated, but the domain. Typically thistplinklogin.net (this address no longer works, I wrote more about it here), ortplinkwifi.net... At the same time, there is also access to the settings by IP address.
Just look at the sticker on the bottom of the device itself. There will be an IP address and a standard username and password, which will also be useful to us.
Hostname can be specified.
We type the address of our router in the browser, and go to it. A window should appear in which you need to specify a username and password. Everything is simple here: the standard password is admin, username too admin... If you changed this data, then enter yours. If you forget them, then most likely you will have to reset the router settings so that you can again use the standard data to enter the control panel.
The control panel will open.
Or like this:
That's all, we went into the router settings. If you have I can't go to the router settingsthen see this article. In it, I wrote about solving the most popular problems that can arise.
Comment, ask, share tips! Good luck!
