After turning off the router for a day and turning it on again, I began to issue a table with a choice of the type of network, home, etc. After selecting, Wifi connects, but with an error. I start troubleshooting - I do a standard operation with disconnecting the router for 10 seconds, then it gives the result - "The connection of the access point, router or cable modem to the Internet is broken." Moreover, with each attempt, a number is added to the name of the network, corresponding to the number of attempts.
Answer:
You described the problem in general terms. Very little specific information.
- The problem on the computer, which Windows is installed?
- What's the error after connecting?
- Is the router connected to the internet? Are the required indicators blinking?
- Are other devices connected to the router and working?
Try connecting your laptop to a different Wi-Fi network. You need to understand what the reason is: on a computer, or in a router. In the comments, give an answer to 4 questions, and I will try to advise you something.
Update
Since the author did not provide detailed information on the problem, and visitors come to this page with the hope of finding a solution to the error "The connection of the access point, router or cable modem to the Internet is broken", I decided to add some standard tips that should help you.
- First thing to do is restart your router (if you have one) and the computer that is showing the error.
- Next, check if the Internet is working on another device through the same router. Connect your computer to a different network, if possible.
- Try to remember what you did before the error appeared.
- Reset network settings: instructions for Windows 7, and instructions for Windows 10.
Leave additional questions and tips in the comments.
02.11.16
24
Asked by Alexander
