Hello Sergey! Help me please. My nerves are on edge. I don't quite understand this, the problem in general is this. We bought a ZyXel kenetic lite III router in order to have Wi-Fi at home and actually watch channels on Smart TVs.
Connected, Wi-Fi is, everything is connected. BUT on one TV we watch TV channels through the application ugh ugh without interruption. And it is impossible to watch another TV through the same application every 10 seconds, and that's it.
Other applications do not load the picture at all. We watch channels through the provider's application (you may have heard lanta tv), even if only one TV is turned on, it still stutters. And also, for example, the phone connects to Wi-Fi, the first 2 minutes works well, and then it does not want to update in any way, for example, the news feed in social networks. and does not look for a niche in Google. You have to disconnect, reconnect and update further, but again not for long. On the router, the switch is on "main". Help please clarify)))
Answer
Hello. It is very difficult to advise you something. Since there is not even a specific problem and description. And all these "shuts up", "does not connect", it is very difficult to understand when you don't even see the problem.
It can be assumed that there is some kind of interference on the Wi-Fi network channel. In this case, you can try experimenting with changing the channel using this instruction.
Next, I would take a router, reset the settings on it, and update the firmware. After that, I would configure the router again.
It may also be that the TV has a bad signal from the router (I don't know this). Just where there are problems with the unstable operation of the Wi-Fi connection and watching television.
Also, I would connect the TV to the router via cable and check how it will work.
You need to understand that all the brakes in the program when watching TV may be due to low speed. Again, I don't know what speed you have.
Also, the problem may be in the TV itself.
The switch must be on "main". After all, Zyxel Keenetic III Lite works in router mode. There, the modes of operation of the router are simply switched.
13.12.16
0
Asked by Elena
