There is no distribution of wi-fi on the netis 2419e router if there is internet via cable. I found out that on all devices there is a wifi connection without access to the Internet. In this case, you can go to the site of the provider "beeline". It's the same on a computer that is connected via a cable through a router. A technician came, checked the cable, pressed it again.
Then I installed the "setup wizard" program from the beeline and restored the connection on the computer. He could not enter the settings of the router, since the access was password protected, but I could not enter the 100% correct password. Then he reset the router settings himself, tried different connection options.
The result is one - the Internet is available by cable and by cable through a router on a computer, on mobile devices "without access to the Internet", only the provider's website.
Answer
And the specialist from the provider who checked the cable did not check the router settings?
Reset the router settings again. Remove the ISP connection on the computer. It is better to do a network settings reset (not necessary, this is in case you cannot open the router settings). Connect to Netis WF2419E via Wi-Fi or cable. Only one connection should be active on the computer - to the router. Connect the Internet (cable) to the WAN port on the router. You don't need to run any internet connections on your computer. Try to go to the settings of the Netis router. At the factory settings, the web interface will immediately open, there is no password.
If you can get into the settings, try setting up your router. For example, you can use the instructions for configuring Netis WF2419R and Netis WF2419. Only in the Internet connection settings you must correctly configure the connection to your ISP. Beeline seems to use the L2TP connection type. There you need to specify a username, password, server name. You can find out this information from the Beeline support. I saw on the screenshots that you have configured the connection. But maybe you specified some parameters incorrectly. Once the router does not establish a connection with the Beeline provider.
It happens differently, and perhaps in your case the reason is not in the settings of the router. For example, the router does not see the Internet cable (WAN). Or the router just broke down. If the Internet works with a direct connection to a computer, then the provider most likely has everything Ok.
02.08.19
4
Asked by Vladimir
