Until recently, I did not have to deal with Belkin routers. I have never considered these devices seriously. Of course I heard about Belkin, but routers are not their main profile. Recently I saw several routers from this manufacturer in an online store, and decided to buy. To see what these devices are, how to set them up, etc. I bought the cheapest Belkin Wireless N450 Dual-Band Router. A model like F9K1105ru. Why not make normal titles.
I will probably talk about the router itself in the next articles. Most likely in the detailed setup instructions. I was pleasantly surprised by many moments. In this article, I want to show in detail how to access the web interface of a Belkin router. How to open its control panel for customization.
Everything is a little different there (if you have already configured other routers before). There is no specified IP address on the case, which can be used to access the settings. Therefore, for many, the first question arises: what is the IP address of Belkin routers, how to find it, where to look, and how to open the web interface. Let's figure it out now.
The instructions (which are in Russian) contain the address http: // router... On which you need to go in the browser of your device after connecting to the router.
In the control panel, in the local network settings, I looked at the IP address. The configuration page for Belkin routers can also be accessed by the IP address: 192.168.2.1.
Logging into the Belkin Router Web Interface
First we need to connect to the router. You can access the web interface both from a computer or laptop, and from mobile devices. If your device has a network card, then I advise you to connect it to the router using a network cable (which can be found in the kit).
Or just connect to a Wi-Fi network. The factory name of the Wi-Fi network (SSID) and password (Password) are indicated under the foot of the router. On a small booklet (where, by the way, you can write your password later) and on a sticker.
It is enough to connect to the Wi-Fi network using the specified password.
After connecting, open any browser on your device, and go to http: // router. The router setup wizard will open.
Or by IP address: 192.168.2.1
After entering the settings, you can set the necessary parameters, configure the router to connect to the Internet, change the wireless network name and password.
If you do not enter the Belkin router settings, an error appears that the page is not available, or something else, then check the connection to the router and look at the IP settings on the computer. They should be set to receive addresses automatically. More on this in this article: https://help-wifi.com/oshibki-i-polomki/chto-delat-esli-ne-zaxodit-v-nastrojki-routera-na-192-168-0-1-ili -192-168-1-1 /.
If, instead of the router page, a search engine opens (with which, perhaps, you entered this site), then you most likely enter the wrong address in the browser. The address must be entered into the address bar, not the search bar. Try using a different browser.
