Hello. I adjusted the kinetics according to the instructions, but it didn't work. The crux of the problem: I have a Huawei modem from the operator + ZyXEL Keenetic Viva over the wire. It was connected like this: a modem in router mode, and kinetics as a wi-fi repeater. It turned out in kinetics it is written: Internet access is available (broadband connection is lit green), and in the information about the system, where Updates, there is no connection. On the computer it is written in the properties of the adapter - something about the absence of the main dns server! What to do . Help!!!!!!
Answer
Hello. Well, there is definitely something wrong with the ZyXEL Keenetic Viva settings, since in repeater mode there cannot be a wire connection.
You did not write which Huawei modem you have. I think you connect ZyXEL Keenetic Viva to a modem to distribute a Wi-Fi network. In this case, it will be correct to configure Keenetic Viva in access point mode.
Perform a factory reset on ZyXEL. Next, you need to go to the settings, in the "Wi-Fi" section, set the network name and password, and then in the "System" - "Mode" section, switch the router to the "Access Point" mode.
We connect the router with the modem via cable (if I'm not mistaken, then according to the LAN-LAN scheme). ZyXEL will receive internet from the modem and distribute it via Wi-Fi and wire.
30.12.17
0
Asked by Vyacheslav
