Convert Wi-Fi network from 5GHz to 2.4GHz via TP-Link router

Pin
Send
Share
Send

Good afternoon. There is an interesting question, but it lies in the fact that there is a street router operating only at 5 GHz, but many devices (monoblocks, laptops, etc.) do not see Wi-Fi from it, and this is understandable why, but the question is, is it possible to somehow take and convert this signal from 5 GHz to 2.4 GHz through a TP-Link AC750 router (Model No. Archer C2), it is dual-band. Or is it better to re-order a street router and do it normally without these crutches?

Thanks in advance for your reply.

Answer

Good afternoon. It is a pity that you did not write what kind of "street router". Couldn't he be giving away another 2.4 GHz network? As a rule, all routers supporting the 5 GHz band are dual-band.

And one more important point: is it possible to stretch a network cable from a "street router" to TP-Link Archer C2?

There is one solution to your problem that you can try. It may be possible to convert your 5 GHz network to 2.4 GHz.

The method is to configure the TP-Link Archer C2 router in bridge mode at a frequency of 5 GHz. According to the idea, after that he will distribute two networks. Including in the 2.4 GHz range. Which is what you need.

For setting up such a connection, we have a detailed guide: setting up a Tp-Link router in bridge mode.

I looked, in the TP-Link Archer C2 settings, there seems to be such an opportunity.

Try it. After clicking on the "Scan" button, a list of networks will appear. Select a Wi-Fi network from an "outdoor router". In the "Password" field, enter the password for this network. Click on the "Save" button.

Then you can change the network name in both the 5 GHz and 2.4 GHz bands. And set your password. It turns out a wireless bridge in the 5 GHz range at the output with two Wi-Fi networks in different ranges. Something like converting a Wi-Fi network from one band to another.

If it does not work, see the article, the link to which I gave above. Since you may need to change the IP address of the Archer C2, and / or disable the DHCP server on it.

23.03.18

4

Asked by Alexander

Pin
Send
Share
Send

Watch the video: How to Setup a TP-Link WiFi Router (May 2024).

essaisrff-com